What a perfect build/kit...with so many personal touches, to boot! Next owner's gonna be a happy camper come summer time...
On Sunday, February 24, 2019 at 8:09:02 AM UTC-8, DarinM wrote: > > Time to sell my beloved, but undersized, Atlantis. It's certainly seen > some use and has the beausage to show for it, but no dents/rust. It's > amazing as a touring/singletrack/dirt oriented all-rounder. It was my first > Riv and I really have been amazed by it since I bought it as a frameset > last summer, sadly it's just too small. On that note, I will sell it with a > $50 discount to any first time Riv owner. These are special rides and I > hope it can provide the same experience for another rider. > > > Lots of pictures here <https://flic.kr/s/aHsmxfe9ae>, with some build > changes since some were taken. The build list below lists everything for > sale: > > > > Frame/fork > > Atlantis 56 > > Headset > > IRD RollerDrive, installed by Riv > > Tires > > 4 x Schwalbe Thunder Burt LiteSkin. Around 200 miles spread across these, > my bad… > > 1 x Schwalbe Racing Ralph, lightly used in the front > > 2 x Compass 54mm, standard casing > > Tubes > > Schwalbe SV-13, a few ounces of Stans included, wow. > > Crankset > > Shimano 6206 175, 46-37-24, two Willow rings, Shimano granny > > Bottom Bracket > > Shimano UN54 122.5 with 2mm spacer for chainring clearance > > Rear Derailleur > > Shimano XT M739, long cage > > Front Derailleur > > Shimano LX > > Cassette > > Shimano 12-28, 7 speed > > Chain > > KMC > > Shifters > > Suntour ratcheting bar ends > > Brakes > > Shimano CX-50, upgraded with Shimano pad holders, KoolStop pads > > Brake Levers > > Shimano Tiagra > > Stem > > Nitto Dirt Drop, 8cm > > Handlebars > > Nitto RM-013, 52cm, wrapped khaki Newbaum's > > Seatpost > > Nitto S65/Crystal Fellow > > Rack 1 > > Nitto 32F > > Basket > > Wald medium, hammer customized ;) > > Light > > B&M IQ-X, silver > > Extras > > Zefal hp-X 3 (fits behind seatube with or without fenders) > > SKS 65mm fenders, mounted with Shimano pad spacers and Sheldon nut > > Nitto light mount, left side > > Wheelset > > Alex Adventurer2 rims (tubeless, 25mm wide), Wheelsmith DB spokes > > Front > > Shimano LX Dyno, 32h, Wheelsmith 2/1.7/2 spokes, Sapim Polyax brass nipples > > Rear > > XT M732 7 speed hub (NOS when built), 32h, DT Swiss 2/1.8/2, DT brass > nipples > > > > > > Price for everything above: $2250 plus freight, I already have a box and > packaging supplies for a complete bike. Located in Pullman, WA or back in > Seattle in a few weeks. > > > > Swap the Nitto 32F/Mini front rack for a 34F/Big front rack for $50. > > > > The Nitto 32F threaded attachment stud was trimmed too short to stick out > of the crown for a nut, so I drilled the back of the fork crown hole here > to accept a recessed brake nut. Looks clean and works well with the Sheldon > nut and front fender. Drilling was done with a good setup on a drill press. > No harm done, but important to share. > > > > Lots of nice tires in the package as I'm reluctantly divesting in 26" > gear, seeing as I don't think I'll find a frame in my size any time soon. > Sorry I'm a dummy and at least mounted all of the Thunder Burts, they are > all relatively low mileage though. Some probably only have 20-30 miles on > em, one may have only been unpacked and carried as spare on tour... > > > > I also have an 8/9/10 speed, non-dyno wheelset I could sub in for less $$ > for anyone not down with 7 speed. Velo Orange Touring hubs and Escapade > rims. It will change a few of the components (dyno light at the least) and > take a few weeks to round up, so if you're interested in that one, let's > chat about price. > > > > Feel free to ask any questions about the frame or build kit. I've tried to > be as detailed as possible, but I'm sure I missed something. > > > > Thanks for looking, > > > > Darin > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
