It's a bit fiddly/tricky, but you can use a Tektro (or Cane Creek) lever by simply removing the lever from the body & swapping them side to side. Getting the lever out is simple enough; simply (gently) drive the pin out with a simple punch. Swap the levers in the bodies and reinstall the pins. The tricky part is getting the return spring over the screw head that holds it. First time will have you cussing, but once you've mastered it, no problem. With the lever swapped in the bodies the end of the lever points down in a very comfortable position rather than up & the cable routing exits on the underside of the bar.
-- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.