Drw mentioned earlier that Keith's rack sits too far forward and a bit high for the Clem. The former puts most of the ahead of the front of the axle rather than behind it, while the latter increases the moment of inertia in the side-to-side direction. Leah's rack, on the other hand, sits several inches closer to the fork and a couple of inches lower: note the distance between the rear of the rack and the v-brake and the gap between the rack and tire. That setup is more optimized for riding with a high front load, if that's your preference when hauling stuff with the bike.
--Ed C. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/4e03b4dd-fc31-40ff-bcbf-25b1277fcef4%40googlegroups.com.
