Done it on a Cheviot and Clem, it's a relatively simple install if you're good with bike mechanics and follow the directions at Luna closely. I'm not sure what the impact driver is for, the only dedicated tool you need is the wrench for tightening the big nut and its locknut on the non-drive side.
One thing to note is the big washer those nuts butt up against is knurled to dig into the BB shell so the motor will (hopefully) not move under power. It's not a functional issue - I've removed motors and put the BB back in just fine - but it's a thing you can see if you put the bike back to unpowered later. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/ce82dd9b-0b5f-4ad3-b424-b83d556fd061%40googlegroups.com.
