I've been drooling over 26" dirt drop builds <https://theradavist.com/2017/12/jakes-pacific-northwest-do-all-trek-970-morgan-taylor/> / builds <https://thewheelvintage.com/> and was hoping to get some pointers and maybe even score a frameset while I'm at it.
For the most part, my experience with wide, supple tires has stayed in the 700c wheel size, going all the way up to 48mm. My rides being 85% paved, country roads, I've found that tires wider than 700x35 start to feel slightly dead and sluggish especially with beefier casings...so I'm looking into a smaller wheel size. I'm 6'2", 135lbs, and typically ride 62cm road frames. I'm currently on a pair of Jack Brown but have my sites on René Herse Rat Trap Pass tires for the most width yet similar OD to a 700x23 wheel. I'd love to hear people's opinions on Rat Trap's for road use. I'm more than okay with sacrificing time if it means I can take on paths less traveled. And if anyone's holding a tall, vintage mountain bike frameset that could accommodate those tires please let me know! Here are a few boxes I'd like to check: - Unique welds, either lugged or fillet brazed steel - Cantilever brakes both front and rear - Something a bit more elegant than a standard unicrown fork - eyelets for racks Thank you very much, - Andrew -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/3766a58e-2497-4aaf-8fa8-0283f18ce129o%40googlegroups.com.
