One of my levers failed so I just replaced it with a spare. At some point I'll probably upgrade to a set of Pauls or an equivalent.
Thanks very much for the information and the offer, Joe! On Jan 24, 2021, at 2:57 PM, Joe Bernard <joerem...@gmail.com> wrote: > Nope, you need long-pulls. You can have these for shipping (should be less > than $10) if you just need something that works for cheap. Tektro with the > graphics wearing off and lean-against-the-fence rub on the ends, but all > there and good. Adjustable for pull ratio, too, but will come to you set up > for v-brakes. > > Joe Bernard > Marin County CA. > On Sunday, January 24, 2021 at 2:26:23 PM UTC-8 Matthew Williams wrote: > Hi everyone, > > Will these vintage levers work with a modern pair of Tektro > V-brakes/linear-pull brakes? > > > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/a490478e-943f-4b72-8746-14b107d76e68n%40googlegroups.com. > <20210124_145331.jpg> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/26930A48-F73E-4EBC-9DB6-F0C992CB1F65%40gmail.com.
