> I'm afraid BMX and offroad folks in general don't really think about > Q-factor and would likely look at you funny if you talked about it much. > That said; it sounds as though a simple BB swap would solve 80-90% of your problem? 10mm shorter spindle should be doable based on the measurements you've given above. I can however recommend a couple Square taper BMX cranks that you can generally find on ebay for between 55 & 100 dollars without too much effort. I have some Promax SQ-1's on my Bombora and I am pretty happy with them, they come in a variety of colors and Lengths and are generally less than $60. Also for about $70. you can get the BOX Five Square tapers, better know name, but not as much variety. I don't know the Q on either of these, but judging by the Promax on my Bombora they are not low Q!!! Great thing is they are cheap, so you could get some, mount them and if they are too wide, get a narrower BB spindle. actually you could probably do both, New crank and new 10mm narrower BB. Just search Cold forged Cranks on Ebay.
Good luck > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/30a05bc3-56bb-499e-a706-f244a9a1b209n%40googlegroups.com.
