Doug, I have an early Hilsen 59 cm 700c (2006?)I switched from the standard Riv Sugino triple to a RH 46/30 double. Phil Wood. BB 110 I think. Anyway, didn’t need to change anything except the front der. IRD alpine hit the chain stay and I went with a suntour lite double der ( vintage)good luck, John Walnut Creek On Sunday, May 2, 2021 at 12:53:47 PM UTC-7 Doug Williams wrote:
> I have a 58cm 650b A. Homer Hilsen that I purchased from Riv in 2014. I > have been loving it ever since! It has the Sugino Triple Crank 46-36-24 and > I run it all friction shifting with bar end silvers, 8 speed with a 11-32 > cassette. The front derailer is Shimano Claris Triple. The bottom bracket > is bbc110. > > So...I'm getting older and I notice I don't use the 46 ring much, at least > not with the higher gears in the back. I am definitely an "UnRacer" anyway. > I am thinking of getting the Rene Herse double cranks with 42-26 rings. If > I go with the 8 speed megarange 11-34 cassette in the back, I would give up > almost nothing in the lower gears and lose just some high gears that I > rarely use anyway. So two questions: > > 1. Is my bottom bracket compatible with the Rene Herse cranks? I think so, > but I'm not sure. Would now be a good time to replace it anyway? > > 2. Should I just keep my Claris triple FD and crank in the limit screw or > go with something like the Shimano CX70 or some other double FD that works > well with compact 42-26 rings? > > Any other comments or suggestions would be welcome. > > Doug > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/8d346112-0dd0-4a58-9bc0-86032d7657a8n%40googlegroups.com.
