GoPro uses the 3M VHB tape for their mounts so it should be plenty strong for most uses. I bought some of these for another project and they have held up well:
https://www.amazon.com/gp/aw/d/B00HLYCBRI?psc=1&ref=ppx_pop_mob_b_asin_title Robert Tilley San Diego, CA Sent from my iPhone > On Sep 3, 2021, at 7:33 AM, Kainalu V. -Brooklyn NY <[email protected]> > wrote: > > It was mentioned before, and I'll put my vote in for VHB tape (very high > bond). Not a pro, so I can't make a pro tip, but as an enthusiastic amateur, > let me recommend that you first stick it to the badge, carefully trim it back > from the edge, and stick it, hopefully not upside down, because- very high > bond. > -Kai > >> On Thursday, September 2, 2021 at 3:28:32 PM UTC-4 Yankeebird wrote: >> Thanks all I'll take a look at the options. >> >>> On Wednesday, September 1, 2021 at 1:21:08 PM UTC-4 Scott McLain wrote: >>> I am with Garth. Silicone adhesive seams like it would be better than two >>> way tape/adhesive. Just my $0.02. >>> >>> >>>> On Wednesday, September 1, 2021 at 8:33:57 AM UTC-6 Christopher Cote wrote: >>>> I've had to reattach all the glued-on headbadges on my Riv bikes. I use 3M >>>> auto trim tape, available at auto parts stores, and of course at Amazon. >>>> Works perfectly, and comes in reasonably sized (and priced) rolls. I find >>>> many uses around the house and shop for the remainder of the roll. >>>> >>>> Chris >>>> >>>> >>>>> On Tuesday, August 31, 2021 at 8:46:30 PM UTC-4 Yankeebird wrote: >>>>> My cheviot fell off my Cheviot. Thankfully, I saw it about to go and >>>>> grabbed it, sheepie is not sitting forlornly on the side of a road >>>>> somewhere. >>>>> >>>>> I need to replace the double-sided sticky rubber thing they use to keep >>>>> the headbadges on. Anyone know what it is, or have a better solution? > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/4db592e2-8f24-4850-b00a-cb2b6b100acfn%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/82B52B6F-5EBC-4D31-8DEF-1AA8A7E66A9F%40gmail.com.
