I've got the Deore shadow rear mech that Riv sells, a 12-36 9 speed cassette and Silver bar-end shifters and I noticed it takes waayyyyy more effort to pull the lever up to run the lower gears than before. I'm considering using their downtube shifters for a little extra leverage. Is this due to the stronger spring in the rear mech or what? Is there something i can do or will time and use make it easier?
And just to vent, this shadow design is a little, well, dumb. I can't throw the chain across the whole range to the small cog without it getting stuck on the part of the mech where the limit screws are. Not that I would ever do that but damn. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/ecac5c2e-26d5-4fad-9eba-1b8bed5ff19bn%40googlegroups.com.