To reuse the ones he already has.
On Wednesday, December 29, 2021 at 12:20:52 AM UTC-8 vhans...@gmail.com wrote: > Why? The bushing is replaceable. > > > On Tue, Dec 28, 2021 at 19:12 Joe Bernard <joer...@gmail.com> wrote: > >> I've never had to do it and apparently no one else here has, either, so >> I'll offer advice: Big pliers in heavy towel, grab that raised edge so >> you're off the smooth surface, squeeze gently and twist. Good luck! >> >> Joe Bernard >> >> On Tuesday, December 28, 2021 at 4:55:19 PM UTC-8 Sam Perez wrote: >> >>> Hi all, >>> What’s the correct way to remove the Paul cantilever boss pivots. I’ve >>> not yet exhausted my options but I’d like to error on the side of caution >>> and preserve the smooth surface. >>> >>> Thanks! >>> Samuel >>> >>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "RBW Owners Bunch" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to rbw-owners-bun...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/rbw-owners-bunch/98df53de-9e9e-47f1-8261-bcfff6e1bf29n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/rbw-owners-bunch/98df53de-9e9e-47f1-8261-bcfff6e1bf29n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- > *VIctor R. Hanson* > *Gen Mgr* > *Schmier Industrial Properties* > *o: 510-652-0800 <(510)%20652-0800>* > *c: 510-207-8593 <(510)%20207-8593>* > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/0adb5076-a0dd-4a1b-94fb-850396017e86n%40googlegroups.com.
