Hello John, I recently had a frame/fork powder coated so it had the same problem, the powder coat paint partially filled in the holes. So I used a drill bit to ream the holes out. I don't recall which size I used, but I can check if needed.
Good luck, JohnS On Saturday, July 30, 2022 at 11:59:07 PM UTC-4 John Rinker wrote: > Hey All, > > I've got an older set of XT V-brakes that I'd like to try on my Hunq. The > issue I'm running into is that the bottom of the bosses seem too wide for > the diameter of the V-brake. As such, the spring pin won't engage in one of > the 3 convenient holes (you, know, the spring-pin engagement holes). > > Anyone have any ideas or experience with this. > > Cheers, > John > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/65c3be9d-686c-4755-8923-6b6eb07afcfan%40googlegroups.com.
