Thanks, Laing. That seems to be the consensus here. Really appreciate everyone's help!
On Monday, September 5, 2022 at 8:22:24 AM UTC-7 lconley wrote: > I have these on almost all of my bikes. The cups that are installed in the > frame are zinc plated aluminum. The steel race goes inside the cups - > aluminum will not hold up. > From the bottom: > Fork - Steel fork crown race - roller bearings - steel race - lower cup - > frame. > > [image: IRD headset.JPG] > > Laing > > On Saturday, September 3, 2022 at 8:42:03 PM UTC-4 Greg J wrote: > >> Hi folks, >> >> Sorry about the cross-post from the iBob list. But since this is going >> on my 96 A/R, and Riv sells this (or similar) headset: >> >> I am installing the Tange/IRD headset with the needle bearing in the >> bottom cup. I am wondering about the order of the steel race insert (I >> only have one, although I know that in the Stronglight headsets, there are >> 2 per needle bearing). >> >> Does it go: >> (1) Bottom cup - steel race - needle bearings - base plate, or >> (2) Bottom cup - needle bearings - steel race - base plate ? >> >> Or did I lose one steel race, which should be on both sides of the needle >> bearing? >> >> thanks, >> Greg >> Oakland, CA >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/0b21652d-4f49-4fc0-96da-1a4d1dda8c94n%40googlegroups.com.
