Thanks for the info Doug! This sounds exactly how I’d want to use my potential setup, and why I want to revert to 3X-land.
> On Nov 1, 2022, at 8:40 PM, dougP <[email protected]> wrote: > > Just another confirmation that the large pulley Altus that Rivendell carries > will handle an 11-36 9 speed. I have this on my Atlantis. Shimano always > seems to be conservative in their ratings. It's on a triple with a 34 middle > & I use the entire cassette on that ring. 44 outer is only used up to maybe > the 3rd cog from the big, and the 24 inner out to maybe the 4th cog from the > inner. > > dougP > > On Tuesday, November 1, 2022 at 4:52:38 PM UTC-7 [email protected] > <http://gmail.com/> wrote: > I found this picture from a Rivendell customer's bike in Rivendell's blog ? > Needless to say, I was quite amazed to see the capacity and potential at the > same time. This could very well branch out into lengthy conversations between > members herein. > Enjoy ! > > Kim Hetzel > Yelm, WA. > On Tuesday, November 1, 2022 at 4:39:42 PM UTC-7 John Bokman wrote: > Thanks everyone for your comments. > > Doug I didn’t know that there were different versions of the Altus? I think > I have the large pulley. > > >> On Nov 1, 2022, at 4:27 PM, Doug H. <[email protected] <>> wrote: >> > >> I have the newer, smaller pulley version of the Altus on my Clem and just >> installed a 7 speed 11-36 cassette and it works fine. My 9 speed topped out >> at 34 that I had on there stock. >> Doug >> >> On Tuesday, November 1, 2022 at 7:24:30 PM UTC-4 Johnny Alien wrote: >> If we are talking about the cool looking big pulley Altus RD then I do >> indeed have that rigged up on my Clem L with an 11-36 9 speed rear. No >> roadlink used and no problems. Just works as-is. Not sure if it matters but >> I am 1x with this setup so no triple up front but it does shift a 9 up to 36. >> >> On Tuesday, November 1, 2022 at 6:10:03 PM UTC-4 Mackenzy Albright wrote: >> I switched wheelsets and forgot to switch out my 11-42 cassette and >> accidentally friction shifted my altus to 38-42 and it didn't explode. I >> think it has much more range than spec'd. I otherwise use 38/24 double with >> a 11-36 cassette normally. >> >> On Tuesday, November 1, 2022 at 2:01:39 PM UTC-7 John Bokman wrote: >> Thanks for the real world recommendation Dave! >> >> >>> On Nov 1, 2022, at 1:59 PM, DavidP <[email protected] <>> wrote: >>> >> >>> In my experience you can usually expect to go a bit above stated max cog. >>> While the RD-M310 is rated to 34t, I would give it a go with a 36t. >>> I have a bike with a Deore M531 (rated to 34t) shifting a 9 speed 40t. >>> That said hangers can vary and if you find it's not quite there then a >>> short hanger extension (road link or similar) will get you there. >>> >>> -Dave >>> >>> >>> On Tuesday, November 1, 2022 at 4:34:41 PM UTC-4 J Imler wrote: >>> I don't think you'll have any problem, especially if you use a Wolftooth >>> Roadlink <https://www.wolftoothcomponents.com/products/roadlink>. May not >>> even be necessary though. I think I got a 42t low gear using said setup, >>> but that was an 8 speed. >>> >>> On Tuesday, November 1, 2022 at 1:23:29 PM UTC-7 John Bokman wrote: >>> HI Rivsters. >>> >>> I'm wondering if anyone has successfully shifted a 12-36 shimano 9-speed >>> cassette with an Altus RD? >>> >>> I currently have an altus, and like it well enough, but am using a 44x30, >>> 11-32 8 speed. >>> >>> The new setup would be a triple up front (48-34-24), and a 12-36. >>> >>> According to Shimano, the Altus only shifts up to a 34 cog. >>> >>> Just wondering if any of you Rivsters have been able to shift lower than >>> that? >>> >>> I can hunt for another derailer if need be, but would much rather not. I >>> don't like the looks of the one Riv sells (Shimano Deore 592) because it >>> doesn't have the barrel adjuster. I guess could potentially go to the >>> Alvio, or the used market. I actually have a Deore something or other which >>> does shift to 36, but it's R Rise, and I have never gotten used to the >>> reverse movement. Drives me mad! >>> >>> Thanks, >>> >>> John >>> Portland OR >>> >> >>> -- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "RBW Owners Bunch" group. >>> To unsubscribe from this topic, visit >>> https://groups.google.com/d/topic/rbw-owners-bunch/A-I8JKhS_xc/unsubscribe >>> <https://groups.google.com/d/topic/rbw-owners-bunch/A-I8JKhS_xc/unsubscribe>. >>> To unsubscribe from this group and all its topics, send an email to >>> [email protected] <>. >> >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/rbw-owners-bunch/085b203c-a4ac-4395-ab04-eba2f1e7e275n%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/rbw-owners-bunch/085b203c-a4ac-4395-ab04-eba2f1e7e275n%40googlegroups.com?utm_medium=email&utm_source=footer>. >> >> >> -- >> You received this message because you are subscribed to a topic in the >> Google Groups "RBW Owners Bunch" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/rbw-owners-bunch/A-I8JKhS_xc/unsubscribe >> <https://groups.google.com/d/topic/rbw-owners-bunch/A-I8JKhS_xc/unsubscribe>. >> To unsubscribe from this group and all its topics, send an email to >> [email protected] <>. > >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/rbw-owners-bunch/59364c75-1c7a-446c-a8cc-bad228b34b27n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/rbw-owners-bunch/59364c75-1c7a-446c-a8cc-bad228b34b27n%40googlegroups.com?utm_medium=email&utm_source=footer>. > > > -- > You received this message because you are subscribed to a topic in the Google > Groups "RBW Owners Bunch" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/rbw-owners-bunch/A-I8JKhS_xc/unsubscribe > <https://groups.google.com/d/topic/rbw-owners-bunch/A-I8JKhS_xc/unsubscribe>. > To unsubscribe from this group and all its topics, send an email to > [email protected] > <mailto:[email protected]>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/50389167-8943-4360-a29c-96077f25a358n%40googlegroups.com > > <https://groups.google.com/d/msgid/rbw-owners-bunch/50389167-8943-4360-a29c-96077f25a358n%40googlegroups.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/EC5F873B-2F33-42D4-B7FF-BC0C283B582F%40gmail.com.
