Brass ferrules are made in both 5mm and 4mm Max, and yours is likely 5mm and the boss is 4mm. There are step down ferrules that would work. Unless you have a local source it may be easy-er to just replace them with a 5mm boss if keeping the brass appearance is that big of deal. On Sunday, December 4, 2022 at 1:05:47 AM UTC-5 Joe Bernard wrote:
> Will shifter housing fit in there without a ferrule? > > On Saturday, December 3, 2022 at 9:24:24 PM UTC-8 maxcr wrote: > >> Hi Everyone I'm working on a new project and bumped into this shifting >> boss which I've never seen. They don't seem to accept a standard brass >> ferrule. >> >> Any ideas on how to deal with these other than replacing them? >> >> Thanks >> Max >> [image: IMG_8920.jpeg] >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/0888425c-f6c8-427c-a3a5-6a29085d92bdn%40googlegroups.com.
