Personally, yes, I would expect to want a shorter stem with wider bars. I would probably try it with the existing stem, but I'd anticipate going shorter.
Which also makes me realize that, since I'm pretty sensitive to the impact of stem length on handling, there's probably some setups where my optimum bar width, doesn't work with my optimum stem length. Paul in AR On Monday, December 5, 2022 at 1:07:45 PM UTC-6 bjmi...@gmail.com wrote: > Hey Everyone! > In theory, if one was to switch to wider handlebars, I would assume the > stem length would have to get shorter to keep the reach about the > same...right? > > I have 48cm noodle bars on my Sam with a 9cm tallux. The reach is pretty > good...maybe a little on the stretchy side. If I go to a 54cm noodle bar, > I'm thinking it'd be necessary to get a shorter stem. Right? > > Thanks for your thoughts! > Ben in Omaha > > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/0c6513b4-843b-4878-a804-3496153781d2n%40googlegroups.com.