It reminds me a lot of the dropout on my old Surly Karate Monkey. Maybe longer though, it’s hard to tell.
On Tuesday, December 6, 2022, Bill Lindsay <tapebu...@gmail.com> wrote: > The "Quickbeam style ends" were shown on Rivs instagram. It's a plastic > prototype, presumably 3d printed. They are pretty snazzy and consistent > with lots of the "design vernacular" Rivendell has been using in the > 2020s. They are hooded, so it's cheaply tiggable, and leaves tons of > freedom on angles. It's got a der hanger in the casting. It's got some > frills, and looks stout. I'm eager to see them in metal and on a frame. > > Bill Lindsay > El Cerrito, CA > > On Wednesday, August 3, 2022 at 7:21:53 AM UTC-7 Bill Lindsay wrote: > >> That sounds about right to me, Eric. I'm guessing something that is kind >> of like a Leo Roadini with cantilever brakes, clearance for 50mm tires and >> Quickbeam-style ends. I hope it has a long front center to avoid TCO. My >> Crust Florida Man has no TCO with 700x50 tires, and I think that's >> awesome. My 58cm Quickbeam has a tiny bit of TCO with a 700x42 front tire, >> and it's annoying. I'd gladly run a 2cm shorter stem with a 2cm longer >> front-center and the same HTA. >> >> BL in EC >> >> On Wednesday, August 3, 2022 at 6:21:39 AM UTC-7 Eric Daume wrote: >> >>> I saw the earlier images, but it’s still not super clear. I’m guessing >>> it’s like a long wheelbase-sloping top tube Quickbeam? >>> >>> On Wednesday, August 3, 2022, Bill Lindsay <tape...@gmail.com> wrote: >>> >>>> The Roaduno samples are on the boat, at the dock in Oakland this week, >>>> so those sample builds will be along soon. Exciting. >>>> >>>> Bill Lindsay >>>> El Cerrito, CA >>>> >>>> On Monday, July 11, 2022 at 7:08:47 PM UTC-7 Johnny Alien wrote: >>>> >>>>> I think the Gallops are 2023 and they have already gone through two >>>>> proto stages. I think Roadunos might be further out than that. >>>>> >>>>> On Monday, July 11, 2022 at 11:00:35 AM UTC-5 Bill Lindsay wrote: >>>>> >>>>>> The plan had been that the Prototype Roadunos would be in one of >>>>>> these Summer Shipments. I think that the prototype Roadunos maybe were >>>>>> in >>>>>> the shipment with the Atlantis' or maybe will be in the next shipment. >>>>>> Those will be prototypes, so we'll presumably get to see them built up, >>>>>> and >>>>>> locals can test ride them. If there are any final tweaks Riv needs to >>>>>> make >>>>>> on the real production Roadunos, they'll find those goofs on the >>>>>> prototypes. >>>>>> >>>>>> Then, we'll wait. I think sometime in early 2023 the production >>>>>> Roadunos will be buyable by us. I had been eagerly awaiting the >>>>>> prototypes >>>>>> arriving because I am local and was going to give one a test ride. I >>>>>> have >>>>>> managed to acquire a Quickbeam and so I'm not as desperate, but I'm still >>>>>> keeping my finger on the pulse. Folks that are desperate for the >>>>>> absolute >>>>>> latest should call Will and ask him. >>>>>> >>>>>> Bill Lindsay >>>>>> El Cerrito, CA >>>>>> >>>>>> On Monday, July 11, 2022 at 7:16:14 AM UTC-7 Doug H. wrote: >>>>>> >>>>>>> Hey all, I wanted to revive this old thread to see if any one has >>>>>>> any new information about when the Roaduno might be released for sale. >>>>>>> Thanks, >>>>>>> Doug >>>>>>> >>>>>>> On Friday, August 27, 2021 at 9:27:35 PM UTC-4 Joe Bernard wrote: >>>>>>> >>>>>>>> This excerpt is from the August 6 newsletter. I'll be shocked (but >>>>>>>> bake in that I tend towards the skeptical) if we see a Roaduno before >>>>>>>> 2023. >>>>>>>> >>>>>>>> - The rest of our orders, most of which we placed in September >>>>>>>> 2020, have been pushed back to 2023. We're still waiting to hear for >>>>>>>> sure >>>>>>>> what we can get from our other frame maker - so far all they've said is >>>>>>>> that they'll try their hardest to get us Homers in July '22, but no >>>>>>>> word >>>>>>>> yet on Roadunos, Roadinis, and Gus-n-Susies, which they also make. - >>>>>>>> >>>>>>>> Joe Bernard >>>>>>>> >>>>>>>> On Friday, August 27, 2021 at 6:02:30 PM UTC-7 Michael Morrissey >>>>>>>> wrote: >>>>>>>> >>>>>>>>> Is there any update on the Roaduno? If there was, I missed it. >>>>>>>>> >>>>>>>>> ? >>>>>>>>> >>>>>>>>> M >>>>>>>>> >>>>>>>>> On Thursday, December 24, 2020 at 3:52:10 PM UTC-5 Philip >>>>>>>>> Williamson wrote: >>>>>>>>> >>>>>>>>>> How about those colors and graphics?? I love them. >>>>>>>>>> https://www.rivbike.com/blogs/peeking-through-the-knothole/ >>>>>>>>>> no-22-december >>>>>>>>>> The headbadge is no Rosco Bubbe rocketship, but #2 is quite nice. >>>>>>>>>> >>>>>>>>>> (Chrome ate my longer post) >>>>>>>>>> >>>>>>>>>> Philip >>>>>>>>>> Santa Rosa, CA >>>>>>>>>> >>>>>>>>>> On Friday, December 11, 2020 at 3:03:18 PM UTC-8 Nathan F wrote: >>>>>>>>>> >>>>>>>>>>> From today's BLAHG: >>>>>>>>>>> >>>>>>>>>>> "1. *RoadUno,* a onespeed derailerless country-kind of bike >>>>>>>>>>> (not modeled after a track bike). For pavement, town, commutes. >>>>>>>>>>> It's not a >>>>>>>>>>> trail bike. You can ride it on dirt and gravel roads, but it's kind >>>>>>>>>>> of rude >>>>>>>>>>> to ride it on hilly and rough trails. More on it way below." >>>>>>>>>>> >>>>>>>>>>> Sounds great. I'm praying for purple (no grey or RBW Blue, >>>>>>>>>>> please--sorry but they use 'em too much) and v-brakes. Based on the >>>>>>>>>>> name I >>>>>>>>>>> think the latter is unlikely : ( >>>>>>>>>>> >>>>>>>>>>> - Nathan in PDX >>>>>>>>>>> >>>>>>>>>> -- >>>> >>> You received this message because you are subscribed to the Google >>>> Groups "RBW Owners Bunch" group. >>>> >>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to rbw-owners-bun...@googlegroups.com. >>> >>> >>>> To view this discussion on the web visit https://groups.google.com/d/ >>>> msgid/rbw-owners-bunch/a43f4ef0-cfae-474c-9d98- >>>> cb8614a95d59n%40googlegroups.com >>>> <https://groups.google.com/d/msgid/rbw-owners-bunch/a43f4ef0-cfae-474c-9d98-cb8614a95d59n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/rbw-owners-bunch/85efda9a-1aac-40b3-b27c- > 87adf23a3ccdn%40googlegroups.com > <https://groups.google.com/d/msgid/rbw-owners-bunch/85efda9a-1aac-40b3-b27c-87adf23a3ccdn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/CAHFNW5Dd0S1pUDzh5LR21F%3DkewsjgJAguWfVjZjwDN6se4aJWw%40mail.gmail.com.
