I’ve only seen them listed as 36 hole hubs. Is that correct, that there is not a 32 hole option? David Lipsky On Thursday, January 5, 2023 at 7:43:15 AM UTC-8 lconley wrote:
> I built one up in the rear wheel of my Clementine Cargo Cycle with a > Velocity Cliffhanger rim. It was a good match, cosmetically, to the > Panasonic front dyno hub. Works perfectly so far. I bought two, I haven't > built the other one up yet, it will probably get used with a Shutter > Precision front dyno hub that I have.. > > It was about, say, 5% harder to build into a wheel due to the drive side > flange being larger than the non-drive side flange - had to flex the > non-drive side spokes to get them into the flange, but pretty minor. The > larger drive side flange reduces the angle difference between the sides, so > the wheel is slightly stronger, and has slightly more even spoke tension > between the sides, so a good trade-off. > > I say use one, especially if you are using a front dyno hub. When not > using a front dyno hub, I prefer my hubs to match, but not everyone feels > that way. > > [image: hubs.jpg] > > Laing > Delray Beach FL > > On Thursday, January 5, 2023 at 7:49:25 AM UTC-5 Keith P. wrote: > >> I couldn’t find a thread where these had been talked about. >> Has anyone tried the Silver rear hubs & have opinions about them they’d >> like to share? >> >> Starting to build up my new Sam and am looking into such things. >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/6622fea2-1244-4408-9372-2dc7635769c9n%40googlegroups.com.
