Eric did it, his bike is featured on The Radavist... https://theradavist.com/erics-1985-bridgestone-mb-2-review/
Well done Eric! JohnS On Tuesday, February 14, 2023 at 5:48:04 PM UTC-5 eric...@gmail.com wrote: > Thank you, Jose :) > > From what I recall Grant was fairly new at Bridgestone when the '85s came > out. Sometime in 2022 I read an account written by Grant about when he > first influenced any of the bike design or specifications and when he > designed his first frames but I can't recall the dates or where I read > this. Probably in a Blahg. > > On Monday, February 13, 2023 at 12:19:51 PM UTC-5 Jose wrote: > >> Amazing build! Did Grant P design the 1985 MB-1 and MB-2? >> >> On Monday, January 23, 2023 at 3:06:27 PM UTC-8 eric...@gmail.com wrote: >> >>> [image: MB-2 230115 S 00 Complete.jpg] >>> >>> Hi all — I just finished up a build, it's a 1985 Bridgestone MB-2. I >>> have a full build video up over here: https://youtu.be/gJPnbpzjbKg >>> >>> [image: MB-2 230115 S 01 Complete.jpg] >>> >>> I purchased the bike as a complete from Marketplace, it was stock but >>> for the saddle and tires. Everything was removed and I passed the frame >>> over to Rob Gassie at Bing Bicycles. He added some rack mounts to the fork >>> and seat stays, changes some the cable guides, added a third bottle boss to >>> the downtube and two additional bottle bosses to the underside. He also >>> stripped the frame to raw steel. >>> >>> [image: MB-2 230115 S 02 Headbadge.jpg] >>> >>> Instead of paint I went for a raw finish. There are two applications of >>> patination acids, with and without heat, followed by clear lacquer and wax. >>> >>> [image: MB-2 230115 S Rear mech.jpg] >>> >>> It's built up with a mix of parts from across time, all silver. >>> De-anodized some black Paul cantilevers and also de-anodized an XTR >>> RD-M952. Dead stock WTB grease guard headset purchased from Jacque Phelan. >>> Lots of Suntour, some TA cranks and modern parts from Japan. Crust x Nitto >>> Shaka bars, MKS bear trap pedals, Nitto cable hanger. >>> >>> [image: MB-2 230115 S Downtube.jpg] >>> >>> I had some custom brass headbadges made with the old Bridgestone logo >>> which I shaped and finished. >>> >>> [image: MB2 09 SM Head tube.jpg] >>> >>> Velocity Atlas 26" wheelset with a Kasai dynamo hub up front and an XTR >>> M900 in the rear. Front wheel by Rich at Rivendell, rear built by Andre at >>> my local bike shop. I'm running Rene Herse extra-light tires with a Rat >>> Trap Pass in the back and a Humptulips Ridge in front. >>> >>> Many thanks to members here for helping out with parts when I needed >>> them: Trevor B., Dave H., Liz S. and Patrick M. >>> >>> • Velocity Atlas 26" 32/32 wheelset >>> • Rene Herse Antelope Hill, extra light >>> • Rene Herse Rat Trap Pass, extra light >>> • Shimano XTR M900 rear hub >>> • Kasai 32H front hub >>> • Schmidt Edelux II polished headlight >>> • Busch + Müller light mount >>> • Crust x Nitto Shaka handlebars, 54cm >>> • Newbaum's cotton bar tape, white >>> • Suntour Bar-Con shifters >>> • Suntour Superbe levers >>> • Paul Neo Retro cantilever brakes, front >>> • Paul Touring cantilever brakes, rear >>> • Hunter Nugz barrel adjusters >>> • Dia Compe yoke hangers >>> • Fairweather x Nitto stem-mounted cable hanger >>> • Nitto Technomic 6cm stem, 26.0 clamp >>> • WTB New Paradigm Grease Guard headset >>> • TA Specialities Cyclotourist crankset, 48/42/28, 170mm >>> • Shimano 115mm square taper bottom bracket >>> • Shimano 9 speed 12-36 cassette >>> • MKS XC-III pedals >>> • Suntour AR front derailer >>> • Shimano XTR MD-952 rear derailer >>> • Suntour XC Pro seat post >>> • Brooks Conquest saddle >>> • Wheels Mfg. brass housing ferrules >>> • Sim Works x Nissen brass cable ferrules >>> • Sim Works x Nissen brake and shift housing >>> • Sim Works x Hoshi >>> • M5 brass socket head screws >>> • Shovel Research M5 brass slotted screws >>> >>> Larger pictures here: >>> https://drive.google.com/file/d/1_gXuRvwsKYVjG7GLMqFf2KGhPrYRNlp3/view?usp=sharing >>> >>> Thanks for lookin'! >>> >> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/ad9a4bb0-d9be-405d-b307-1246c23e8061n%40googlegroups.com.
