The few times I've placed orders with BL have been easy with very fast shipping. If you give feedback about the site's performance they usually add a bunch of cool stickers.
On Friday, February 17, 2023 at 9:34:56 AM UTC-5 rmro...@gmail.com wrote: > Well that was easy. I’ve been reluctant to order any bike parts from out > of the country, not sure why. But I pulled the trigger yesterday on a V5 & > appropriate spacers from Bluelug. A very user friendly website & reasonable > shipping. Estimated delivery next week! Not sure if there will be any > additional fees? > > Sent from my iPhone > > On Feb 16, 2023, at 2:55 PM, greenteadrinkers <greentea...@gmail.com> > wrote: > > Just mounted a Billie bar to my V5, I would say both Choco, and Billie > bars are compatible. Regarding the Bosco Bullmoose, I agree with Keith's > comment above. Below, is the Billie bar with the V5. Also, a few details > show the space between the stem and the front cap of the stem, looking at > images at Blue Lug, there is no gap, guessing that's not a big issue, but > thought I'd point it out. The bolt extends outside of the rear port, so > there's no loss in bolt length. Wow, wonder how much ($$$) a modern remake > of the Slingshot would cost? > > <IMG-9813.jpg> > <IMG-9816.jpg> > <IMG-9818.jpg> > > > On Thursday, February 16, 2023 at 1:46:18 PM UTC-5 iamkeith wrote: > >> On Wednesday, February 15, 2023 at 12:14:57 PM UTC-7 Patrick Moore wrote: >> Interesting; I just glommed on the V5, which I'd not seen before. It >> seems to be a good design for bars where the moment of force is relatively >> high, like many of the current Rivendell bars. >> >> Curious: I can see how a Technomic would be wholly overwhelmed by a >> Bosco. But what about a wide-faced, 4-bolt single-clamp stem? The only >> examples of these last are the Ritchey 4-bolt faceplate threadless stems I >> have on 2 bikes, but I wonder if these might hold a Bosco in place firmly >> without requiring over tightening of the bolts? >> >> This is not an idle question; I may try a bosco or tosco or some other >> such long sweepback bar on the Monocog 29er, and I'd not want to have to >> buy a new V5 stem as well as a new, expensive, bar. >> >> >> Patrick, just in case it isn't clear: The V5 stem probably only works >> with Nitto-made bars. The Tosco, even in the narrower 25.4 versions, lack >> the long sleeve swaged onto the clamp area. On nitto bars, i know it >> works with the Bosco, but I think it might even be worth double checking to >> make sure the sleeve is long enough on the Billie, Chaco, Wavie, etc. >> Starting with the Billie bar, Nitto adopted a new manufacturing method that >> combined a bulged section WITH a sleeve. For the Bosco and older models, >> the clamp diameter was made up entirely with a swaged sleeve - like their >> drop bars. >> >> Regarding clamp force: Ive experimented with boscos quite a bit. I >> found a steel, ritchey force stem with a broad clamp surface, to be >> adequate, even with a single bolt. I was eventually able to get them to >> work in a technomic stem, and not slip after tightening enough, but found >> this unsatisfactory for another reason. The aluminum bars flex in a >> torsional way, and the narrower clamp width exacerbated this. I think this >> anti-torsion characteristic of wide clamps would be the best part of the V5 >> stem. >> >> Ultimately, I found the steel bullmoose version to be the only Bosco I >> can use - despite wishing the angle was different (I wish the ends angled >> down more). The steel is less flexy and the effective stem length is 150mm >> which is still barely long enough. It's hard to find long stems these >> days. (This is the problem with the OG slingshot stems, especially. I >> have one in my parts bin and keep hoping to use it, but it never works. >> I'll eventually get custom bars for it.) >> >> All of this became moot for me, once the Tosco came out. It offers all >> of the bosco benefits while fixing most of its flaws. But, as I noted, it >> won't work with the V5 stem unfortunately. >> >> On Wed, Feb 15, 2023 at 11:45 AM greenteadrinkers <greentea...@gmail.com> >> wrote: >> I love the V5, here are some pictures of the v5 with a Choco on my >> Moonshiner. If I was going to use a non-moose Bosco on a Gus, I would only >> use a v5, I had a non-moose Bosco with a Technomic on my Sam, and had to >> use a shim, the bar would slip unless I tightened the stem as hard down as >> absolutely possible. Now I have a Bosco Moose on the Sam, perfection! So... >> 100% no go Bosco/Technomic for off-road roughstuff unless mated with a v5, >> I say this from experience. An aside, if you order a v5 from Blue Lug check >> out the brass spacers or the Nitto spacers, both are fabricated to mate >> perfectly with the v5. >> > -- > > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bun...@googlegroups.com. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/5edcba51-64a8-4011-a728-56e900acd329n%40googlegroups.com > > <https://groups.google.com/d/msgid/rbw-owners-bunch/5edcba51-64a8-4011-a728-56e900acd329n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > <IMG-9816.jpg> > <IMG-9813.jpg> > <IMG-9818.jpg> > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/76947b72-2f41-4eba-842d-9fd3d50eda2cn%40googlegroups.com.
