Re: [RBW] SON Hub & B+M Micro Taillight: must be wired to the front light?

Thu, 16 Mar 2023 20:12:17 -0700

You should be good… Pretty sure that’s how most rear dynamo lights work… wired into the front light. Just read up on what connectors you’ll need if you plan on doing the wiring / soldering yourself.

On Mar 16, 2023, at 10:55 PM, Matthew Williams <matthewwilliamsdes...@gmail.com> wrote:

Hi everyone,

I have a SON dynamo front hub, with an Edelux II headlight. I was planning to get the  Busch + Muller “Micro” (µ) taillight:


Elsewhere, I read this particular taillight 
"The µ is designed to be powered from the front light only"
"This light must be wired to a front light, and should not be run directly off a dynamo hub”

I have several questions:

Is this setup inadvisable/poorly-considered?
Will the taillight sap power from the headlight?
Is the B+M Micro compatible with the Edelux II and SON hub?
Has anyone done this setup (SON hub, Edelux II, B+M Micro)? 
Does this setup require special customization?
What should I know before getting this taillight and setting it up?

As always, your sage advice, experience, wisdom, and recommendations are welcomed and appreciated.

--
You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/E7C002A1-F686-4624-B02D-E4C749F9C28B%40gmail.com.

--
You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/C15328A3-A3D4-454E-B451-CED0D9A3638B%40gmail.com.

Reply via email to