Because the slice is below the knobs, I'd try sewing it up with a stout nylon thread, covering the thread with a wipe of Shoegoo (inside and out) and a tri-folded Clifbar wrapper (tough material) on the inside between the tube and tire. This has worked well for me when living in countries where tires were hard to come by.
Cheers, John On Thursday, August 3, 2023 at 2:21:37 AM UTC-7 Nick Payne wrote: > That cut looks a bit large. You could try a tyre boot cut from an old > slick tyre to see if the casing continues to herniate with the boot inside > it. Or you could try a tubeless repair kit. I've used the Hutchinson > Rep'Air kit on both tubeless and tubed punctures, but the cuts I fixed were > not quite that large. I think the instructions with the Hutchinson claim it > can be used on punctures up to 5mm size. > > Nick Payne > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/cf0ab4be-6027-44b4-99c2-fc73f3209d28n%40googlegroups.com.
