Checked my Face Plater in my custom, it shows the same gap as in your video with the same movement..I never knew! I think it's a tall quill stem being yanked by wide bars (Boscos in my case) and these are the results. I'm going to keep riding it as is.
On Wednesday, September 6, 2023 at 12:07:36 PM UTC-7 rmro...@gmail.com wrote: > Greetings folks. I would appreciate any input regarding this. Since new I > have had some movement in my headset / stem that concerns me, possibly > unnecessarily so? Please review the attached video link and tell me what > you see. I felt the headset was a bit loose so tightened it a bit. This > made no difference. The minimum insertion line for the Faceplater stem is a > full two centimeters below the headset lock nut. So, the question seems to > be is this stem quill movement excessive & if so how to eliminate it. I do > mind the inherent flex. It no doubt contributes to the comfort of the bike? > I just want to be certain it is safe and causing no harm. > I appreciate your help. > Richard > https://photos.app.goo.gl/ZXVZBrQEVzamDV1H6 > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/bb8b515c-c610-4d58-b244-878aeef7b9c0n%40googlegroups.com.
