Allan, Excellent use of that 135 degree noodle. I have used a couple of these to route derailleur cable from the SunTour Command shifters in place of more cumbersome full cable run on my Wilderness Trail Bike Dirt Drop bar OX Brand Ti 29er cruiser. Also used a 90 degree one on the front cable hanger on my Gary Fisher Gemini tandem with Surly Open bar. Made for smoother cable routing.
I would say a bike shop probably has them sitting in a parts drawer, but some shops may just toss them. Depends on the shop. Nice seeing standard canti's in use on these bikes. Thanks, Reginald Alexis On Tuesday, April 2, 2024 at 5:48:57 AM UTC-5 Allan McLane wrote: > Kim, > > The photo shows how Riv arranged the cable housing guide braze-on on this > bike, a Rosco Platypus. The entire housing slides through the braze-on and > the end of the housing slips into the entrance of the noodle. It isn’t > really necessary but I also slipped a short length of clear tubing around > the outside of noodle about midway along, just to hold it off the seat tube > paint. > > Here’s one source for that part: > https://www.universalcycles.com/shopping/product_details.php?id=205 > > Allan in SE Vt > > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/1d615f23-b3ef-449c-aae8-85afd823297cn%40googlegroups.com.
