Hi J-D, Crank is the Spacycles TD-2 Super Compact Double. FD is Microshift Sword 2x.
> On 27 Jan 2025, at 4:27 pm, J-D Bamford <[email protected]> wrote: > > Dan - what crank and front D are you using? > > On Friday, January 24, 2025 at 6:49:46 PM UTC-7 Dan wrote: >> I think this is a good change. I literally had to have the 110bb on my >> (non-lugged) Roadini swapped out for a 113 yesterday because the 110 meant >> the front derailleur was rubbing the chain in the small ring. >> >> On Saturday, 25 January 2025 at 01:40:54 UTC+10:30 [email protected] <> wrote: >>> I learned from Roman at Riv that they now have 113mm BBs (actually measures >>> 114mm with my digital calipers) installed by their Taiwanese framebuilder, >>> along with the headsets. I learned this when inquiring about my frame-only >>> 2024 Lugged Roadini. They will not swap (or exchange) a different BB at no >>> cost... you just have to buy a different one if you need a different >>> spindle length. Perhaps this assembly spec affects other frames as well. >>> >>> Although their cranks (and other brands) largely spec 110mm BB spindle for >>> a double, Riv's heavily pushing "skeleton key" front derailleurs that >>> require a 113mm BB spindle. So keep this in mind if you're ordering a >>> frame-only. I'll be ordering a 108mm BB to swap in, to tighten up q-factor >>> and hopefully improve upshifting on my Rene Herse double crank (10sp with >>> Ultegra chain, per RH suggestion). The BB swap is a minor inconvenience, >>> minor delay in my planned build schedule this month. >>> >>> Probably good news for many that their framebuilder does the Tange headset >>> installation. I wasn't too fazed doing the Tange install myself on a >>> Roaduno, but when I looked up Tange's threaded headset assembly diagram it >>> didn't even show all the parts (including ring gaskets whose up/down >>> orientation is important). I'm pretty sure I got that assembly right... >>> LOL... it feels OK when I ride/steer :-) >>> > > > -- > You received this message because you are subscribed to a topic in the Google > Groups "RBW Owners Bunch" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/rbw-owners-bunch/HWlW9e3njNA/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected] > <mailto:[email protected]>. > To view this discussion visit > https://groups.google.com/d/msgid/rbw-owners-bunch/91b45e0c-16c5-42c7-a9c9-eebc88d56971n%40googlegroups.com > > <https://groups.google.com/d/msgid/rbw-owners-bunch/91b45e0c-16c5-42c7-a9c9-eebc88d56971n%40googlegroups.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/rbw-owners-bunch/FDF6764C-CB60-455A-B0CA-1C3541E79490%40gmail.com.
