Wow Kim! Great initiative and thanks for the inspiration to do the same. Will post if I ever get around to it.
Nick The Triangle, NC On Friday, April 4, 2025 at 10:50:16 PM UTC-4 [email protected] wrote: > Recently, I needed a bicycle project to do, since I am finished tinkering > with my Clem. My inspiration came from a short video on Vimeo under > Rivendell Bicycle Works called "Pedal extenders" from two years ago. > > > https://vimeo.com/709656292?autoplay=1&muted=1&stream_id=Y2xpcHN8MjkwOTI1MnxpZDpkZXNjfFtd > > I noticed in the video that there was small blocks of wood, one light, > maple ? and the other dark, walnut ? I do not know for certain. I thought > since I live the PNW I will try aluminum. > > I purchased the correct length and amount of screws (8) and an solid > square aluminum bar. I did my measuring with a pair of calipers, marked my > holes to be drilled and the cut-off points. > > Afterwards, upon assembly, I encountered two of the metal bars with holes > aligned well, while the others did not. Therefore, they needed to be > drilled out more. > > All in time, I managed to get them all assembled and back together. I am > happy with outcome. I just have to do a road test. > > I forgot to mention that I cleaned out and re-greased the ball barrings > in both pedals before I started my project. > > Kim Hetzel. > > [image: 20250404_164054.jpg] > [image: 20250404_172731.jpg] > > > > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/rbw-owners-bunch/a4bca97d-b095-4f10-a655-f502f21cf1b5n%40googlegroups.com.
