That's the same stem I have. I love the quality and details. Enjoy! I did mean 5mm. I'm really sensitive to fit changes and notice small differences.
On Thursday, September 11, 2025 at 1:48:42 PM UTC-4 Ben Miller wrote: > Jay, glad to hear it worked out! I just my Nitto/Sim Works drop bar to go > into a Nitto faceplater. I think it looks great. > > I'm assuming you meant 5 cm or 50 mm shorter reach though? > > [image: 1000001964.jpg] > On Thursday, September 11, 2025 at 6:27:31 AM UTC-7 Jay wrote: > >> I received the Nitto faceplate stem as noted above. Looks great on the >> bike (cleaner lines and slimmer than quill adapter and bulky stem I had on >> there), and up against the bars (that are only a touch more shiny). When >> installed and with the hoods same height and rotation as before, then reach >> is about 5mm shorter and that's perfect for me as I wanted a little less >> reach. I think I'm set! >> >> On Tuesday, September 9, 2025 at 10:55:24 AM UTC-4 [email protected] >> wrote: >> >>> Also, Soma just announced the Nitto Griterium, a 26mm bar flared 15 >>> degrees.78mm reach and 128mm drop. I thinking this will be worth a try. >>> Hits the OPs wish list too! >>> >>> On Saturday, September 6, 2025 at 7:39:15 PM UTC-6 Ben Miller wrote: >>> >>>> Whelp, Liz immediately proves me wrong! Haha. And of course it's Merry >>>> Sales with the short reach/26 bars. >>>> >>>> If you do want the Highway One's, you could always flare them out >>>> yourself in a bench vise. Pretty easy to get a 10 degree flare. >>>> >>>> On Saturday, September 6, 2025 at 4:49:24 PM UTC-7 Elisabeth Sherwood >>>> wrote: >>>> >>>>> (Didn't mention it before because there's no flare. But, damn, it's >>>>> comfortable!) >>>>> >>>>> >>>>> On Saturday, September 6, 2025 at 7:48:27 PM UTC-4 Elisabeth Sherwood >>>>> wrote: >>>>> >>>>>> Re. a short-ish-reach (75mm reach) silver handlebar with a 26.0 clam >>>>>> diameter, the Soma Hwy One is wonderful. It has saved many a classic >>>>>> bicycle for many, many more riding years! >>>>>> >>>>>> >>>>>> https://www.somafabshop.com/shop/soma-handlebar-hwy-one-road-bar-4369?category=783#attr=3003,1855,2365 >>>>>> >>>>>> (If the width you're looking for is out of stock at Soma, it's >>>>>> probably available elsewhere.) >>>>>> >>>>>> Liz >>>>>> Washington, DC >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> On Saturday, September 6, 2025 at 6:48:47 PM UTC-4 Ben Miller wrote: >>>>>> >>>>>>> Jay wrote: "faceplate quill stem, 31.8, at least -17d, 70mm length, >>>>>>> polished silver. Closest I found was Nitto UI-12SSB (which has a dull >>>>>>> appearance)." >>>>>>> >>>>>>> I'm not 100% sure what you mean by "polished silver?" Polished >>>>>>> aluminum? If you are looking for that, I don't think you are ever going >>>>>>> to >>>>>>> find such a stem. Every version of quill faceplaters I've ever seen is >>>>>>> steel. Nitto's are steel with nickel plating that they call "dull >>>>>>> bright." >>>>>>> It is indeed shinier than anodized aluminum, but duller than polished >>>>>>> aluminum. The Analog Discord fingerling stem that Franco mentioned is >>>>>>> either raw steel with clear coat or black cerakote. >>>>>>> >>>>>>> I have both stems (Raw Fingerling and UI-12 31.8 Clamp) Both are >>>>>>> nice, but I feel like the raw really needs to fit the rest of your >>>>>>> build >>>>>>> aesthetic (mine is on a Crust Lightening Bolt in a brown-tinted clear >>>>>>> coat >>>>>>> that works so well together). Obviously the black stem pairs well with >>>>>>> black handlebars. The UI-12 31.8 is beautiful, but the quill is fairly >>>>>>> short, so not great if you need alot of height from your stem. >>>>>>> >>>>>>> As for a short reach (<75mm) drop bar in 25.4mm clamp. I also doubt >>>>>>> that exists. Short reach drop bar like you are describing are fairly >>>>>>> modern >>>>>>> and therefore are likely to be designed around the more modern clamp >>>>>>> diameter of 31.8 mm. I could be wrong, but I doubt you'll find a drop >>>>>>> bar >>>>>>> with less than 110mm reach with a 25.4 or 26 mm clamp. >>>>>>> On Thursday, September 4, 2025 at 6:05:07 PM UTC-7 [email protected] >>>>>>> wrote: >>>>>>> >>>>>>>> I have this on my Sam and contemplating putting it on my roadini >>>>>>>> >>>>>>>> >>>>>>>> [image: DSC08793.jpg] >>>>>>>> >>>>>>>> Discord Fingerling 1" Quill 31.8 Clamp Stems >>>>>>>> <https://analogcycles.com/products/discord-fingerling-stems> >>>>>>>> analogcycles.com >>>>>>>> <https://analogcycles.com/products/discord-fingerling-stems> >>>>>>>> <https://analogcycles.com/products/discord-fingerling-stems> >>>>>>>> >>>>>>>> Franco Rinaldi >>>>>>>> c: 646.403.0661 <(646)%20403-0661> >>>>>>>> >>>>>>>> -Pardon any typos, Siri typed this message- >>>>>>>> >>>>>>>> On Sep 4, 2025, at 8:50 PM, Jay <[email protected]> wrote: >>>>>>>> >>>>>>>> I currently have a quill stem adaptor and Whisky 12d flair bars on >>>>>>>> my Roadini. The stem is -17 degree, 70mm length. It works, but I >>>>>>>> don't >>>>>>>> like the look of the stem and want something sleeker. Also, I was >>>>>>>> thinking >>>>>>>> of trying a different bar... >>>>>>>> >>>>>>>> >>>>>>>> *Option 1 (keep bars, new stem)* >>>>>>>> If I were to keep these bars, I would like a faceplate quill stem, >>>>>>>> 31.8, at least -17d, 70mm length, polished silver. Closest I found >>>>>>>> was >>>>>>>> Nitto UI-12SSB (which has a dull appearance). So many of these >>>>>>>> faceplate >>>>>>>> stems are positive rise >>>>>>>> >>>>>>>> *Option 2 (new bars and stem, perhaps 25.4)* >>>>>>>> I see plenty of quill stems that are -17d or more, 60mm, 70mm and >>>>>>>> longer. Problem is I cannot find a bar that is: >>>>>>>> a) short reach (75mm or less, BTW 75mm reach would mean I go down >>>>>>>> to 60mm stem, I don't want a noodle bar that is longer reach) >>>>>>>> b) medium flare, like 10+ degrees >>>>>>>> c) shallow drop (115-130mm) >>>>>>>> d) polished silver >>>>>>>> >>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups "RBW Owners Bunch" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>> send an email to [email protected]. >>>>>>>> To view this discussion visit >>>>>>>> https://groups.google.com/d/msgid/rbw-owners-bunch/9e9eb360-4625-42f4-9577-76cf3eaba995n%40googlegroups.com >>>>>>>> >>>>>>>> <https://groups.google.com/d/msgid/rbw-owners-bunch/9e9eb360-4625-42f4-9577-76cf3eaba995n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>> . >>>>>>>> >>>>>>>> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/rbw-owners-bunch/edeee373-24a5-48e2-af60-002ed0976468n%40googlegroups.com.
