Do you know what chainring and bottom bracket size you are using? Thank you
On Tue, Oct 14, 2025 at 09:30 Tyler Ryan <[email protected]> wrote: > SunRace and Sram both make 12 speed cassettes that work with standard > hyper glide: > > > https://www.biketiresdirect.com/product/sram-pg-1230-eagle-12spd-cassette?adl=1&gad_source=1&gad_campaignid=229749626&gbraid=0AAAAAD_gqPnoScVlJqWNtgVHXZSihHKdb&gclid=Cj0KCQjw6bfHBhDNARIsAIGsqLhgOb3WFFjH5DwMnX8yw6V6wNol1i5bVxyhEjg_OoUJsB_KLJFsbWAaAiJSEALw_wcB > > > https://www.universalcycles.com/shopping/product_details.php?id=97905&attribute=239724&gad_source=1&gad_campaignid=793175996&gbraid=0AAAAAD8_PrUpT8qJ1MkE8_jIKj1-BVrF6&gclid=Cj0KCQjw6bfHBhDNARIsAIGsqLgmo1u3-Bm-hnYepaGfB7E8Ks8547WUNqrtPQQEZXp2hzPFcH_9g30aAhD9EALw_wcB > > I used the sram pg-1230 in a Shimano system(RD-M7100-SGS) and SLX shifters > with no issues on a Surly Troll. > > On Sunday, October 12, 2025 at 9:31:10 AM UTC-7 Hoch in UT wrote: > >> Apologies if I missed this. But I’m fairly certain going 12-speed will >> then limit your chainring/crank options, especially if you’re ST. And >> wheels, since you need microspline. Basically, everything needs to be >> 12-speed specific. >> I did that with SRAM and found out the hard/expensive way. >> >> These days, I stick to good old 8-9 speed parts. >> >> On Saturday, October 11, 2025 at 7:13:36 AM UTC-6 Bryan H wrote: >> >>> Thank you everyone for suggestions! I have decided to go with shimano >>> 1x12 on my lugged susie. I am still figuring out chainline and which chain >>> ring to get. I posted in another thread but figured i would post it here as >>> well. I have purchased a white industries 73x113mm BB to pair them up with >>> paul 100% cranks. I am confused on which offset chainring i need to get the >>> correct chain line. When i look at pauls chart its recommending i need -3 >>> or -6 offset to achieve a 49mm or 52mm chain line. Which in todays >>> standards is very odd as most chainrings are 0, 3, 6mm. I am not even able >>> to find any minus chainrings for purchase. Any suggestions on this? I >>> attached a photo of Pauls chart, thank you! >>> >>> >>> >>> On Sunday, October 5, 2025 at 9:35:10 PM UTC-7 [email protected] wrote: >>> >>>> The GRX 822 showed up first and I installed it! I expected a 20g weight >>>> savings but it turned out to be more like 60g. The barrel adjuster is also >>>> quite nice, and the niggling clacking noise on my bike is now gone. (And to >>>> think I was suspecting that the frame was cracking when it was just a rear >>>> derailleur pulley going bad!) >>>> >>>> [image: PXL_20251005_223900079.MP.jpg] >>>> >>>> On Friday, October 3, 2025 at 9:03:23 AM UTC-7 Piaw Na wrote: >>>> >>>>> On Fri, Oct 3, 2025 at 8:56 AM Will Boericke <[email protected]> >>>>> wrote: >>>>> >>>>>> Piaw, >>>>>> >>>>>> I’m happy you posted this! My 5100 on a commuter lives a hard life. >>>>>> I disassembled, cleaned and greased and still have squeaks. I’ll order >>>>>> new >>>>>> pulleys. Perhaps replacement sealed bearing units? >>>>>> >>>>> >>>>> I ordered both a replacement pulley set and found on eBay the Ultegra >>>>> level GRX822 rear derailleur which will work as a replacement for the >>>>> entire derailleur for $80 + tax + shipping. (A new m5100 is $28 or so on >>>>> eBay, but I figured I can afford to splurge on fancy parts on my most used >>>>> bike) We'll see which one gets to me first. >>>>> >>>> -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion visit > https://groups.google.com/d/msgid/rbw-owners-bunch/c25fff89-fc5f-4316-b1d7-dfc8cda1bcbbn%40googlegroups.com > <https://groups.google.com/d/msgid/rbw-owners-bunch/c25fff89-fc5f-4316-b1d7-dfc8cda1bcbbn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/rbw-owners-bunch/CAFkTEFkGC-GyUWz77MFtygcuDsshP9mrNMW5eDmK0umyf6eA5Q%40mail.gmail.com.
