I couldn't get the Mark's Rack to work on the front of my bike with the CR720 cantis either. I ended up putting it on the rear and it fits just fine (although it is a bit short compared to most rear racks).
Aaron Young Rochester, NY On Fri, Aug 6, 2010 at 7:31 PM, Ginz <[email protected]> wrote: > Yeah, that sounds like one of those incompatibilities you only come > across through personal experience. You could try some lower-profile > brakes or the Nitto M12 rack. > > > > On Aug 6, 4:49 pm, Garth <[email protected]> wrote: > > When installing some CR720's today on the Bombadil, I found out they > > conflict big time with a Marks front rack, mounted at the braze-ons > > below the canti bosses. This is not good. When installed, the brakes > > cannot open to get the tire out, they hit the struts of the Nitto. Is > > this a secret that I was not aware of? > > > > What to do? I don't know. > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]<rbw-owners-bunch%[email protected]> > . > For more options, visit this group at > http://groups.google.com/group/rbw-owners-bunch?hl=en. > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
