You may try contacting Anthony over at Longleaf (longleafbicycles.com) to see if he has a budget SS wheelset sitting around. I believe he specializes in SS and fixed wheel-buidling. Note: I am not related nor an investor nor getting any kickbacks from Longleaf :) Or contact Rich himself to see what he can do for you (handsonwheels.com). Same disclaimer :)
Good luck! Lee On Nov 3, 8:39 am, Dlbracey <[email protected]> wrote: > I'm building a commuter bike right now and I need a strong singlespeed > wheelset for my 225lb self. I'd like to be able to run 35mm tires and > I have a limited budget. Basically, I'm looking for a set of > Quickbeam wheels, but they don't seem to be available for purchase > from riv. > > I'm considering the following wheelsets that all cost around, mostly > below $200 and all have formula hubs - Sun CR18, VO PBP, Mavic A319, > and a little more expensive Mavic Open Sport. I've read some horror > stories about factory built/bicyclewheelwarehouse wheels, but does any > one here have any experience/advice? Are the horror stories the > outliers? I haven't had any luck finding anything used, but I'm open > to used wheels. > > Thanks for any help. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
