Liesl, Are you going to swap the dyno wheel between bikes as well? If so i think Scott G's arrangement is the easiest to move back and forth, other-wise you'll need to have disconnects at both ends for the wiring on each bike.
I've got a number of the mounts mentioned here, the VO QR end mount, a Gino's Mount for a Nitto Rack and fork mount which i use on the front of my rack. i think the light down low is the most useful for me to illuminate the ground, but the light at the rack level is better for me to be seen. Sometimes i'll add a battery powered light as a flasher. I don't like the handlebar mounts as i always have things on the front of the bike which would block the light. I'm using a simple (and cheap) DLumotec LED light at the moment, been thinking about an edelux, i might pull the trigger this winter when i'm redoing the front-end on my bike. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
