Actually, this is new and may be a good idea if you want really low gears:
it replaces the granny with a device that lets you install a cog as small
as 17t in its place:

http://abundantadventures.com/mt_triple.html

On Fri, Feb 10, 2012 at 11:49 AM, PATRICK MOORE <[email protected]> wrote:

> I knew a Swedish rider (Olaf Stroh, nice guy) who drilled a 38 t TA outer
> chainring to bolt to the penultimate cog of a Shimano cassette, then made
> an extended mounting arm for his rd so that this could accomodate the new
> cog. Lessee: 24/38X27" = 17 whole gear inches. I hear that at least one,
> old SunTour rd could actually accomodate a 38 t big cog.
>
> Then there is the Mountain Tamer Quad --
> http://abundantadventures.com/quads.html -- still available from the same
> guy I visited at the same place back in 1990, in deep, SE Albuquerque. Make
> a 16 t cog into your granny ring! (16/38X27" = 11".)
>
> Me, the only time I use the 24 is when I am bullying my way through deep
> sand -- and even then I tend to fall over after about 15 feet.
>
>
> On Fri, Feb 10, 2012 at 11:31 AM, clyde canter <[email protected]>wrote:
>
>>  Seems to me that 50 to 75 bucks for a set of cogs is not that
>> inexpensive in my estimation. Specially when I only need one.   I just
>> thought it would be cool if I could lower my compact double ( 46-34) a tad
>> for cheap.
>>
>>
>>
>> On Thu, Feb 9, 2012 at 6:55 PM, Jim Thill - Hiawatha Cyclery <
>> [email protected]> wrote:
>>
>>> I'm not aware of a source for 36t cogs, since that's not one that wears
>>> out, and most of the cassettes are not made to have cogs switched out
>>> (easily) these days. As someone pointed out, the Shimano 12-36 9sp cassette
>>> and the 7sp 13-34 cassette are not terribly expensive. Even if you could
>>> find the correct cog, it sure seems like a lot of screwing around.
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "RBW Owners Bunch" group.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msg/rbw-owners-bunch/-/YY_QGbeRL54J.
>>>
>>> To post to this group, send email to [email protected].
>>> To unsubscribe from this group, send email to
>>> [email protected].
>>> For more options, visit this group at
>>> http://groups.google.com/group/rbw-owners-bunch?hl=en.
>>>
>>
>>  --
>> You received this message because you are subscribed to the Google Groups
>> "RBW Owners Bunch" group.
>> To post to this group, send email to [email protected].
>> To unsubscribe from this group, send email to
>> [email protected].
>> For more options, visit this group at
>> http://groups.google.com/group/rbw-owners-bunch?hl=en.
>>
>
>
>
> --
> Patrick Moore
> Albuquerque, NM
> For professional resumes, contact
> Patrick Moore, ACRW
> http://resumespecialties.com/index.html
>
>
>
>


-- 
Patrick Moore
Albuquerque, NM
For professional resumes, contact
Patrick Moore, ACRW
http://resumespecialties.com/index.html

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/rbw-owners-bunch?hl=en.

Reply via email to