... although, looking at the photo again, it appears that the Platrack bolts occupy the holes that the upper stays would use. The draw bolts might be long enough to go through both the MR and PR tabs... not sure.
On Wednesday, April 18, 2012 11:00:25 AM UTC-4, Peter Pesce wrote: > > Thomas- > > I was thinking the same thing myself. The Mark's rack comes with a > additional pair of shorter, bent stays - if you look on the Riv site the > photo of the rack installed in the rear is using these stays on the upper > hourglass mounts. I don't recall my rack coming with the additional set of > draw bolts, but per the Riv site they do, so mine must be in the parts box > somewhere! > > -Pete > > On Wednesday, April 18, 2012 7:36:52 AM UTC-4, Thomas Lynn Skean wrote: >> >> This I too shall try! Rhetorical question: perhaps there's a way of doing >> it without the diving board? >> >> Yours, >> Thomas Lynn Skean >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To view this discussion on the web visit https://groups.google.com/d/msg/rbw-owners-bunch/-/oQdhHBPLjfIJ. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
