That sounds reasonable Ted, provided production costs are low enough, and perceived need high enough. Not sure if I would bother to make the change, but whudooino?
El Schwartzy ________________________________________ From: [email protected] [[email protected]] on behalf of ted [[email protected]] Sent: Saturday, August 11, 2012 7:00 PM To: RBW Owners Bunch Subject: [RBW] RH cranks on a 650B Hillsen? In the comments section of his blog Jan wrote "... I’d love to try 45 mm tires or even 50 mm, but you cannot easily fit tires that wide between cranks with narrow tread (Q factor)." The 650B Hillsens will fit a 45mm tire. Since I expect the new RH cranks were developed with a narrow tread, I am now curious if they clear the chain stays of a 650b Hillsen without using a bb length that gives a wider than spec chain line. Has anyone here put those cranks on a 650b Hillsen, and if so how was the clearance and the chain line? -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
