Thanks again for all the responses; the volume indicates that more than I think about this. I am pleased that my fretting is shared.
C'mon, saddlebag makers have been putting loops on flaps for decades; isn't there a way to make these work? I've tried clipping to the saddlebag flap, with much the same results as with the blinkie loop; at least, no guarantees of proper orientation. No fenders, no helmet, no rack braze ons, so that to use this last method only the dropout fender brazeons are available, which I hesitate to use because lights mounted there can be easily knocked about. Must look again. Perhaps a bracket to position the light inboard of the dropout? Meanwhile, I may resort to the 2AA MiniMaglite with red LED twofishblocked under the left chainstay. At least it will share batteries with the Lightman strobe. And I must experiment with a blnkie clipped to a Sam Browne or rear reflective triangle belt. I agree, a lot of reflective material on the back is best. Or, better yet: replace the VO saddle rail bag loops with another home-made, rail clamp bracket holding a tube to attach the saddlebag straps to. This tube provides a place to clamp a blinkie using a seatstay-sized clamp. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
