I have the VO Copenhagen Dual Leg Kickstand, too. I think the length adjustment is nice. I'm not as enthusiastic with the build compared to the Pletscher. In the up position, the upper leg wobbles a bit. Not anything bad or dangerous, but I don't see the same thing on my Pletscher.
The plastic feet are wide. Good for stability, but it could cause a problem in the up position. I tried it on a ss bike: too much one way, and the feet were into the spokes; too much the other way and they were into the pedal/foot. For wheel flop, I take my ankle band and wrap it around the tire and downtube. I used to have an extra bungie cord on my basket, but that disappeared. On Thursday, February 28, 2013 1:55:22 PM UTC-5, Pudge wrote: > > I have this one on my Atlantis with the 50mm Marathon Supremes, and it > clears those pretty fat tires just fine. > http://store.velo-orange.com/index.php/accessories/chainguards-stay-protectors-kickstands/vo-retractable-dual-leg-kickstand.html > I like the ability to adjust the length of the kickstand legs when you > change tires, too. Works very well. Whether the rear or front is lifted > with the stand down depends on where the load is, though; I try to adjust > the length of the legs so that both tires are as close to the ground as > possible. > > > > *From:* rbw-owne...@googlegroups.com <javascript:> [mailto: > rbw-owne...@googlegroups.com <javascript:>] *On Behalf Of *Dan McNamara > *Sent:* Thursday, February 28, 2013 1:28 PM > *To:* rbw-owne...@googlegroups.com <javascript:> > *Subject:* [RBW] 2-legged kickstand options/opinions > > > > I just swapped the tires on my 52 Bombadil 2TT from Fatty Rumpkins to the > 54 (actually measure 48) Conti Tour Guards and, of course, the Pletscher > 2-legged kickstand won't clear the rear tire. By not clear I mean the stand > rubs against the tire when it is in the up position. > > Any thoughts on other 2-legged stands that might clear a wide-ish tire? I > would prefer that the stand raised the rear of the bike rather than the > front to avoid the front wheel flopping around when I am loading. > > So far there are two options from VO, a couple from Hebie and at least one > from Crow. Any user feedback on these and ideas on others? > > Thanks in advance > > Dan > > -Marin > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bun...@googlegroups.com <javascript:>. > To post to this group, send email to rbw-own...@googlegroups.com<javascript:> > . > Visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en. > For more options, visit https://groups.google.com/groups/opt_out. > > > > ------------------------------------------------------------------------------ > > **************************************************** > > To ensure compliance with Treasury Department regulations, we advise you > that, unless otherwise expressly indicated, any federal tax advice > contained in this message was not intended or written to be used, and > cannot be used, for the purpose of (i) avoiding tax-related penalties under > the Internal Revenue Code or applicable state or local tax law provisions > or (ii) promoting, marketing or recommending to another party any > tax-related matters addressed herein. > **************************************************** > **************************************************** > > This email (and any attachments thereto) is intended only for use by the > addressee(s) named herein and may contain legally privileged and/or > confidential information. If you are not the intended recipient of this > email, you are hereby notified that any dissemination, distribution or > copying of this email (and any attachments thereto) is strictly prohibited. > If you receive this email in error please immediately notify me at (212) > 735-3000 and permanently delete the original email (and any copy of any > email) and any printout thereof. > > Further information about the firm, a list of the Partners and their > professional qualifications will be provided upon request. > **************************************************** > ============================================================================== > > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en. For more options, visit https://groups.google.com/groups/opt_out.
