Double check that the gear cable didn't hop out of the cast-in guides on the bottom bracket. In the work stand I tend to move the shifters unlike I do on the road and sometimes advance the cable without crank rotation to allow the derailleur to move laterally, producing slack enough to let the hanging cable find its' way to the best A to B line and suddenly poor shifting despite meticulous set up to that point.
Andy Cheatham Pittsburgh On Sunday, July 21, 2013 5:44:54 PM UTC-4, shawn wrote: > > I am building up my wife's 51 cm Atlantis and I have ran into some > trouble. I cannot for the life of me get the rear cassette to shift into > the largest two cogs. The drive train is as follows: > Sugino XD-2 46/36/24, Shimano cassettes- 9 Speed 12-36t, Shimano Deore LX > rear derailer, Shimano Deore XT front derailer. > > I believe my chain line is ok. Any suggestions would be greatly > appreciated. > Thanks > Shawn > > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/groups/opt_out.
