First, I forgot to say, My sys is Win 7 32 bit, and R is 3.1.2.
As mentioned a lot, Rcpp and RInside and Qt library seems should be built with
the same compiler, and for i think i will have hudge trouble with compiling QT
using Rtools GCC-4.6.3, so now, i tried compiling Rcpp and RInside with MingW
4.8.2(as my QT is 4.8.6 compiled with it), and i am pretty sure that i am not
using Rtools GCC-4.6.3 by setting PATH and inspecting the compiling output, but
i failed once again, the output is as following which i can not figure it out
due to my poor knowledge (SUPO is my chinese name and '此时不应有' is chinese
which means 'At this point should not be' or something like that),:
----------- output begin here ------------------------------------
> install.packages("E:/STATISTICS/Rcpp_0.11.6.tar.gz", repos = NULL, type =
> "source", INSTALL_opts=c("--no-multiarch"))
* installing *source* package 'Rcpp' ...
** package 'Rcpp' successfully unpacked and MD5 sums checked
** libs
g++ -m32 -I"C:/PROGRA~1/SUPO/R/R-31~1.2/include" -DNDEBUG -I../inst/include/
-I"d:/RCompile/CRANpkg/extralibs64/local/include" -O2 -Wall -mtune=core2
-c Date.cpp -o Date.o
g++ -m32 -I"C:/PROGRA~1/SUPO/R/R-31~1.2/include" -DNDEBUG -I../inst/include/
-I"d:/RCompile/CRANpkg/extralibs64/local/include" -O2 -Wall -mtune=core2
-c Module.cpp -o Module.o
g++ -m32 -I"C:/PROGRA~1/SUPO/R/R-31~1.2/include" -DNDEBUG -I../inst/include/
-I"d:/RCompile/CRANpkg/extralibs64/local/include" -O2 -Wall -mtune=core2
-c Rcpp_init.cpp -o Rcpp_init.o
g++ -m32 -I"C:/PROGRA~1/SUPO/R/R-31~1.2/include" -DNDEBUG -I../inst/include/
-I"d:/RCompile/CRANpkg/extralibs64/local/include" -O2 -Wall -mtune=core2
-c api.cpp -o api.o
g++ -m32 -I"C:/PROGRA~1/SUPO/R/R-31~1.2/include" -DNDEBUG -I../inst/include/
-I"d:/RCompile/CRANpkg/extralibs64/local/include" -O2 -Wall -mtune=core2
-c attributes.cpp -o attributes.o
g++ -m32 -I"C:/PROGRA~1/SUPO/R/R-31~1.2/include" -DNDEBUG -I../inst/include/
-I"d:/RCompile/CRANpkg/extralibs64/local/include" -O2 -Wall -mtune=core2
-c barrier.cpp -o barrier.o
process_begin: CreateProcess(NULL, basename Rcpp.dll .dll, ...) failed.
mingw32-make: C:/PROGRA~1/SUPO/R/R-31~1.2/share/make/winshlib.mk:11: pipe: No
error
process_begin: CreateProcess(NULL, basename Rcpp.dll .dll, ...) failed.
mingw32-make: C:/PROGRA~1/SUPO/R/R-31~1.2/share/make/winshlib.mk:11: pipe: No
error
process_begin: CreateProcess(NULL, basename Rcpp.dll .dll, ...) failed.
mingw32-make: C:/PROGRA~1/SUPO/R/R-31~1.2/share/make/winshlib.mk:11: pipe: No
error
此时不应有 "zDate.o Module.o Rcpp_init.o api.o attributes.o barrier.o"。
C:/PROGRA~1/SUPO/R/R-31~1.2/share/make/winshlib.mk:11: recipe for target
'Rcpp.dll' failed
mingw32-make: *** [Rcpp.dll] Error 255
Warning: running command 'make -f "Makevars.win" -f
"C:/PROGRA~1/SUPO/R/R-31~1.2/etc/i386/Makeconf" -f
"C:/PROGRA~1/SUPO/R/R-31~1.2/share/make/winshlib.mk"
SHLIB_LDFLAGS='$(SHLIB_CXXLDFLAGS)' SHLIB_LD='$(SHLIB_CXXLD)' SHLIB="Rcpp.dll"
OBJECTS="Date.o Module.o Rcpp_init.o api.o attributes.o barrier.o"' had status 2
ERROR: compilation failed for package 'Rcpp'
* removing 'C:/Program Files/SUPO/R/R-3.1.2/library/Rcpp'
* restoring previous 'C:/Program Files/SUPO/R/R-3.1.2/library/Rcpp'
Warning in install.packages :
running command '"C:/PROGRA~1/SUPO/R/R-31~1.2/bin/i386/R" CMD INSTALL
--no-multiarch -l "C:\Program Files\SUPO\R\R-3.1.2\library"
"E:/STATISTICS/Rcpp_0.11.6.tar.gz"' had status 1
Warning in install.packages :
installation of package ‘E:/STATISTICS/Rcpp_0.11.6.tar.gz’ had non-zero exit
status
---- output end here------------------------------
And , i aslo show this:
Status(RInside) Version 0.2.5 should build, install and run on just about any
Linux and OS X system, and even on Windows machines that have the Rtools
compiled by Duncan Murdoch as detailed in the The Windows Toolset appendix to
the R Installation manual. Do not report an error if you fail to build this
with another compiler as this is not supported. Note that to build the examples
on Windows, you need to say make -f Makefile.win to explicitly selects its
Makefile. RInside works particularly well with the Rcpp package for interfacing
R and C++ and shown by the examples in the RInside distribution. In fact, it
now depends on it too.
with the sentence
Do not report an error if you fail to build this with another compiler as this
is not supported.
So, with the above sentence, i am worry about even i compiled the Rcpp and
RInside uing MingW 4.8.2, i could not still compile the examples in RInside
such as "Hellow world". (As i said before, i run the example using Rcpp and
RInside compiled by Rtools Gcc-4.6.3), but anyway, i should try using MingW
4.8.2 to compile Rcpp and RInside, so PLZ help me.
--
PO SU
mail: desolato...@163.com
Majored in Statistics from SJTU
At 2015-06-20 08:00:35, "John Buonagurio" <jbuonagu...@exponent.com> wrote:
>I did this a couple years ago, so you may need to make some changes with the
>latest toolset, but the process was straightforward. Here are my general
>suggestions:
>
> - Use the Qt 4.8.6 binary distribution built with MinGW GCC 4.8.2:
> http://download.qt.io/archive/qt/4.8/4.8.6/qt-opensource-windows-x86-mingw482-4.8.6-1.exe.mirrorlist
> - Set your path to include the Rtools binaries and R, but not Rtools
> GCC-4.6.3, e.g. C:\Rtools\bin;C:\MinGW\bin;C:\R\R-3.2.1\bin
> - Build Rcpp and RInside from source using GCC 4.8.2. You may need to use R
> i386 and prevent x64 compilation, e.g.
>
> install.packages("C:/Rcpp_0.11.6.tar.gz", repos=NULL, type="source",
> INSTALL_opts=c("--no-multiarch"))
> install.packages("C:/RInside_0.2.13.tar.gz", repos=NULL, type="source",
> INSTALL_opts=c("--no-multiarch"))
>
> - Test with Dirk's qtdensity example. It worked for me with no changes using
> the included .pro file with qmake && make.
>
>Looks like you're close. Try the above and if you still have issues I'll give
>it a shot myself tomorrow.
>
>John
>
>> -----Original Message-----
>> From: rcpp-devel-boun...@lists.r-forge.r-project.org [mailto:rcpp-devel-
>> boun...@lists.r-forge.r-project.org] On Behalf Of PO SU
>> Sent: Friday, June 19, 2015 12:30 PM
>> To: rcpp-devel@lists.r-forge.r-project.org
>> Subject: [Rcpp-devel] [rinside] compiling e QT + RInside on win7 have some
>> problems
>>
>>
>> Dear expeRts,
>> Recently, i am plan to write GUI with QT, and using R to compute models.
>> As i am quite new to this area, i searched a lot on the internet, after 2
>> days'
>> studing on the task, i still can not solve the problem, here is my problem in
>> details:
>>
>>
>> 1. My Rcpp and RInside compiled using Rtools GCC-4.6.3 g++.
>> 2. I can compile Rcpp and Rinside with C++ by using Makefile.win and Rtools
>> GCC-4.6.3 g++.
>> 3. The point is QT, i used the 4.8.6 QT library for windows, and MingW
>> 4.8.2. i
>> compile QT with RInside failed by using either MingW or Rtools GCC-4.6.3
>> g++. (i used the .pro and qmake to generate Makefile.Release and make
>> the Makefile.Release) , when i using MingW , compiled failed with a lot
>> undefined reference, wrhen i using Rtools , compile completed but can
>> not run the EXE ( i did add the 4 dlls such as QTCORE4.DLL QTCUI4.DLL and so
>> on ), the comiple print some unused paramters warning and
>> warning: base class 'class Rcpp::S4_Impl<Rcpp::PreserveStorage>' should be
>> explicitly initialized in copy constructor[-Wetra] ........
>>
>>
>> PLZ help me in details, i almost read everything i can find include a
>> solution
>> that he say he comipled Rcpp and RInside with MingW 4.4 and solve the
>> problem, i wonder how did he compiled in details~~~ TKS!
>>
>>
>>
>> --
>>
>> PO SU
>> mail: desolato...@163.com
>> Majored in Statistics from SJTU
>> _______________________________________________
>> Rcpp-devel mailing list
>> Rcpp-devel@lists.r-forge.r-project.org
>> https://lists.r-forge.r-project.org/cgi-bin/mailman/listinfo/rcpp-devel
_______________________________________________
Rcpp-devel mailing list
Rcpp-devel@lists.r-forge.r-project.org
https://lists.r-forge.r-project.org/cgi-bin/mailman/listinfo/rcpp-devel
