[email protected] wrote:
> looking at the assembled set, i would think if you were to connect the
> brackets above the wheels (guessing this is where you'll attach the
> springs somehow) like you did with the central housing (part your
> holding) with a piece of tubing, i think that would help stiffen the
> entire unit.
>
> another thing i just saw, where the brackets attach tot eh central
> housing, is there any way to add a piece of tubing between them like
> you have further up? i would think that this mounting point, as is,
> could be a weak point if the wheel set where to deflect too much from
> one side to another causing the corners on the main plate and the
> brackets to bend a bit. but with the piece of tubing behind it, it
> should add more support surface for them - if you can follow what i'm
> trying to explain (not always good at explaining things when not in
> person).
>
There is a 3/4" axle between each tire set and across the middle of
the hub and a 3/8" bar between each pivot point.
Aahz.
--~--~---------~--~----~------------~-------~--~----~
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to [email protected]
To unsubscribe, send email to [email protected]
Visit the group at http://groups.google.com/group/rctankcombat
-~----------~----~----~----~------~----~------~--~---
