The problem follows the Victor. I was hoping someone knew of a "super-reset" or something. I tried resetting to factory defaults but even that didn't work. I wonder if you can get those things repaired. I'll try to contact IFI Robotics.
Looks like I may be back on EBay shopping for ESCs, Derek. - Doug From: [email protected] [mailto:[email protected]] On Behalf Of Derek Engelhaupt Sent: Monday, April 27, 2009 11:29 AM To: [email protected] Subject: [TANKS] Re: IFI Victor problem Along those lines, you could plug it into the other track channel to see if it sees the PWM signal. If it does, it could be an issue with your receiver. If it follows the Victor, it could possibly be bad. Derek On Mon, Apr 27, 2009 at 3:53 AM, Modena <[email protected]> wrote: a quick google says that flashing orange means it is not seeing any PWM signal - check cabling On Apr 27, 1:17 pm, "Doug Conn" <[email protected]> wrote: > Hello - > > I'm having problems with one of my IFI Victor ESCs. The thing won't > calibrate. I hold down the calibrate button, but it just keeps flashing > orange. It never starts the red and green alternating sequence like it > should. I've tried the things in the troubleshooting section of the manual, > but it didn't help. > > Has anyone else had this problem ? How did you solve it ? > > Thanks, > > Doug --~--~---------~--~----~------------~-------~--~----~ You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat -~----------~----~----~----~------~----~------~--~---
