Grant Mahalek wrote: > There is a very similar motor available with gearbox, pulleys and a > larger 8mm 05T 20 tooth sprocket at > http://www.monsterscooterparts.com/24v-350w-motor-dirt-quad.html . > I'am not sure if this motor would be suitable though. The gearbox output > drive shaft diameter and type is not given (ie.- in./mm diameter shaft, > D-bore with nut, splined shaft with nut or shaft with keyway and nut, > etc.t). Any idea what the gear reduction is....it looks like the same > motor and gearbox as the M01. Has anyone used one of these.
The MY1016Z3 is the same motor that Steve Tyng and Joe Sommer used to sell, so that's the right motor. Here's a closeup photo of the same model referenced above with the sprocket removed: http://astromechbuilder.com/mechloader/v/R7Dude/Tank/IMG_0001+_37_.jpg.html?g2_navId=x25f55d37 showing that it uses the standard 11mm axle, with 4mm key and locknut. > If so, what are you using for a drive sprocket on the gearbox and drive shaft? I use a home-made 11T #35 sprocket machined to fit on the 11mm keyed shaft. If you'd like a pair of those sprockets, I sell them for the cost of the sprocket, plus shipping. Frank P. --~--~---------~--~----~------------~-------~--~----~ You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat -~----------~----~----~----~------~----~------~--~---
