oh and I should add, I have a 30amp fuse on each ESC
On Sep 11, 7:21 pm, Modena <[email protected]> wrote:
> Derek how did you stall a track? With 24v, M01's and 883's, I can put
> my tank against a wall and drive, and the tracks spin on the spot, and
> it weighs over 180lbs. I'm not saying I cant see it happening, just
> wondering what environment you managed to stall and pop a fuse?
>
> On Sep 11, 1:37 pm, Derek Engelhaupt <[email protected]> wrote:
>
>
>
> > Grant,
>
> > You aren't going to find any *commercial* ESC in the 100-120A range that is
> > inexpensive (at least not that I know of). I like both the Vantecs and the
> > IFI Victors. As far as cost goes, the IFI's are hard to beat, but you would
> > need a tank mixing circuit or a radio that can mix the two channels
> > together. The IMX-1 mixer works great in my Sturmtiger. Since the IFI's
> > are so simple, I would say that they would be the cheapest to repair, but to
> > date I have yet to damage mine even when stalling the tracks. That's what
> > the fuses are for. I have popped one of those. There is a very simple
> > calibration button on the Victors. The Vantecs have some different jumper
> > settings, but I'm using the default settings - no set-up at all.
>
> > Derek
> > T065
>
> > On Thu, Sep 10, 2009 at 8:49 PM, Grant Mahalek <[email protected]> wrote:
> > > Hi guys,
>
> > > I'd appreciate your opinion on ESC's
>
> > > I'am thinking of springing for an ESC for my new tank.
>
> > > What I'am thinking of is a drop-in ESC that requires little or no
> > > electronics experience to install and maintain. As well, the controller
> > > should be robust, inexpensive as possible, easy/inexpensive to
> > > repair and somewhat "idiot-proof" to operate (24 - 36 volts, 100 -120
> > > amps,
> > > etc.).
>
> > > I've heard the names Vantec, IFI Victor, Sidewinder, 4QD, etc. kicked
> > > around.
>
> > > What do you guys think? What have you used and what are your comments?
>
> > > Tx,
>
> > > Grant
--~--~---------~--~----~------------~-------~--~----~
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to [email protected]
To unsubscribe, send email to [email protected]
Visit the group at http://groups.google.com/group/rctankcombat
-~----------~----~----~----~------~----~------~--~---
