i was just out in the garage giving the old mantle a good going over - looking to see how i'll want it all to fit together in the end with the new one. while looking, i put the marker in the turret to check further on the fit of things, and took notice that the relocated air line (moved from the bottom of the gun to the side) will still be sticking out too far from the gun and push past the lid of the turret. what i am wondering is - can i use a regular brass elbow fitting from a automotive store (if the threads all match)? can i just use teflon tape, or does it need to have O-rings? or some special elbow fitting i should check at the local wanna-be paint ball / scuba shop? I do know i'll be going for a shorter air line that the one that came with the gun as well as this one currently reaches the rear of the gun (will have to check it all out again, but with the air tank in the turret get to get a better idea of a hose length and placement). i just mention this in case they make a shorter air line with a elbow on it Chris, _Odyssey Slipways_ (http://hometown.aol.com/odysseyslipways/index.html)
-- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
