THanks for the help. I have decided to get a set of #35 sprocket cut and bored to fit the M01s from Frank. But I will kep in mind that 41 is nearly compatible.
Aaron F SCAB On Aug 15, 7:12 am, Derek Engelhaupt <[email protected]> wrote: > I'm using the regular sprocket on my M01 motors using 41 pitch chain and > mated to a 41 pitch sprocket on the drive shaft. > Since my motors have independant tensioning, I haven't had any issues with > the chains coming off. BTW, we just put in > an offer on a house in Austin that has a nice large open back yard perfect > for tank battles... > > Derek > > On Sat, Aug 14, 2010 at 8:31 AM, Frank Pittelli > <[email protected]>wrote: > > > > > On 8/13/2010 11:39 PM, Cobra wrote: > > >> I am also having a very hard time finding #25 or #35 sprockets with > >> an 11mm bore and key way to replace the odd 8mm on the motors. > > > I make #35 11-tooth sprockets to fit the M01 motor drive shaft. So if you > > still need a pair contact me privately. I sell them for cost + shipping. > > > Frank P. > > > -- > > You are currently subscribed to the "R/C Tank Combat" group. > > To post a message, send email to [email protected] > > To unsubscribe, send email to [email protected] > > Visit the group athttp://groups.google.com/group/rctankcombat- Hide quoted > > text - > > - Show quoted text - -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
