In a message dated 9/29/2010 3:02:50 P.M. Eastern Daylight Time, [email protected] writes:
There is a data sheet for it avialbale here; http://www.technobotsonline.com/index.php?dispatch=attachments.getfile&attac hment_id=82 That said, I wouldn't recommend using it. Although I use a 2x25 sabretooth in my own tank - and have had no problems at all - they haven't been reliable when used close to their voltage and current limits. Neil's Leopard has always had problems with it's sabretooth overheating when used with 24v - but he uses drill motors and they are quite highly stressed. Using my unstressed, 12v 180w motors has caused no problems so far. I have bolted a cooling fan directly to the heatsink, however. when you say unstressed motors, are they direct drive or are the geared down? but i also see your runing 12 volts where he is running 24 volts (i wonder how it would work with 18 volts..........) Chris, _Odyssey Slipways_ (http://hometown.aol.com/odysseyslipways/index.html) -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
