Nice work - is that some kind of U-channel steel that you have cut up to make the track pads?
Ben From: [email protected] [mailto:[email protected]] On Behalf Of Guy Gregoire Sent: Monday, 22 November 2010 1:35 PM To: [email protected] Subject: [TANKS] KT rolling hull Hi, I worked on my King Tiger Hull since I got the rolling chain from Will. I worked hard to make 120 steel pads with teeths, 60 both sides. All the important parts are installed and work good. I use 24v. build in gear reduction motors intended for wheelchair. The tank itself is all made out of 16gage steel welded together. I used a 1/35 tamiya KT as model to make the 1/6 scale Hull. With one ESC RS80D, 2 gelcell 12v. and my Spectrum receiver it work very well. In fact you can feel the wooden floor of the sheed vibrate as I was doing the rolling test as seen in the video. you can see pictures and one video at: http://s757.photobucket.com/albums/xx212/Gregtank/ Maybe this KT is up for his nomination. In any case I will continue to work on it and I have to build from scratch the turret and all. I have to do my 1/6 plans for it so it will be time consuming...but I love that hobby :) Guy Gregoire -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected]<mailto:[email protected]> To unsubscribe, send email to [email protected]<mailto:[email protected]> Visit the group at http://groups.google.com/group/rctankcombat -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
