RocketMan (AC004) used one of those motors with a 6:1 gear ratio. The vehicle used 7" wheels was probably too fast at that ratio. 8:1 or 9:1 would have been better. 6:1 was the lowest gear ratio I could build with a single stage #25 sprocket transmission.
- Doug ----- Original Message ----- From: "Cobra" <[email protected]> To: "R/C Tank Combat" <[email protected]> Sent: Thursday, January 20, 2011 2:12:22 PM Subject: [TANKS] 24v250w motor I recently salvaged a 24v 250w non-geared 2500rpm motor from a scooter (still haven't been able to check if it acctualy works, but assumes it does) and am now contemplating a support vehicle build. Is any one currently using this type of motor in any aplications, and if so what gear-down ratio are you using, and what performance do you see. Aaron F SCAB -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
