thanks guys for the info
On Mar 17, 11:32 am, [email protected] wrote: > In a message dated 3/17/2011 7:17:17 A.M. Eastern Daylight Time, > > [email protected] writes: > > Stewart, > > I just installed this type of motor in my tank model. The 25 pitch > chain may be a bit difficult to find master links or even additional > chain on a local level. You could order this through some of the > scooter websites but then you have to wait, pay for shipping and so > forth. The motor shaft will be most likely metric, so either a new > metric sized sprocket will be needed (9-10 tooth) unless you can turn > down the output shaft of the motor. A file will work with the motor > turned on but you really need to be careful not to file away too much. > > i had a problem getting links to fit the chains i bought off of ebay as > well, i ended up getting a length of chain from Surplus Center and links and > had no problems (just make sure you don't by the heavy chain or the links > won't work - they are currently out of them, i called and checked...) > > Chris, > _Odyssey Slipways_ (http://hometown.aol.com/odysseyslipways/index.html) -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
