What motors do you have and what is the diameter of your drive wheel? Steve Tyng
On Mar 29, 12:35 am, Ryan P. <[email protected]> wrote: > I already have motors that will operate at 2600 rpm. They have #25 chain 11 > tooth sprocket. What would be the cheapest and most durable way to reduce the > rpm? I currently have one 80 tooth #25 sprocket and plan to get a second. > > Sent from my iPhone > > On Mar 28, 2011, at 10:33 PM, [email protected] wrote: > > > In a message dated 3/28/2011 10:55:20 P.M. Eastern Daylight Time, > > [email protected] writes: > > I've been gone through all of the builds before but I am on a budget. Which > > is best in cost and durability. My outer hull is nearly finished. Pics will > > follow. > > i'd say one of them M-01 geared scooter motors, but you'd still need a > > sprocket and chain to power your axles > > > Chris, > > Odyssey Slipways > > -- > > You are currently subscribed to the "R/C Tank Combat" group. > > To post a message, send email to [email protected] > > To unsubscribe, send email to [email protected] > > Visit the group athttp://groups.google.com/group/rctankcombat > > -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
