since it seems with all the metal fabrication / machine shops, i can't  
much of anything done (going to make some more calls tomorrow) for what i want  
for my sprung suspension - mainly some smaller parts needing to be cut out 
(and  then some other work to them), i keep hitting dead ends in trying to 
get  anything done for this part of the build
 
these parts were to be used to connect the springs to the suspension arms  
in the tank. i have seen in some pictures where some of you use a thick tube 
(or  maybe solid rod drilled) as a collar and then drill and tap it (from 
the top) to  mount a bolt that then holds the spring(s) in place.
 
is it solid steel rod you make these collar parts from or aluminum? and  
then drill as need be?
 
any chance of seeing a picture of this as a complete assembly, but out of  
the tank? and then possible as a parts break down?
 
and before anyone says search the tank's listings, i have done so the other 
 week (twice, the pc froze - it doesn't handle too much any more) and have  
found some pictures that show some of it, but i'd like to get a picture of 
just  the assembly itself.
 
Chris,
_Odyssey  Slipways_ (http://hometown.aol.com/odysseyslipways/index.html) 

-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to [email protected]
To unsubscribe, send email to [email protected]
Visit the group at http://groups.google.com/group/rctankcombat

Reply via email to